DAMP BS
DESCRIPTION
ANQA-DAMP BS Is one pack wet & damp areas coating for above and underground surfaces. It provides a flexible waterproof coating with good weather resistance.
ANQA-DAMP BS has good flexibility and is ideally suited for use over concrete, light weight concrete surfaces prior to finishing and it is applied by brush, spray or rubber squeegee.
ANQA-DAMP BS is blend of weather and water-resistant pigments, fillers and styrene acrylic ester resins modified with bitumen emulsion.
ADVANTAGES
ANQA-DAMP BS offers the following benefits:
- Waterproof coating.
- Allows surface to breath while remaining
- strongly adhered to thesubstrate.
- Economical
APPLICATION METHOD
Priming:
Primer must be applied over porous and concrete surfaces, dilute ANQA-DAMP BS with suitable water
quantity as required (≈2 to3 kg/20kgpail).
Coating:
- Apply the required coats when the primer coat is getting dry. Multiple coats have to be applied perpendicularly.
- All joints and cracks must be treated and reinforced by fiberglass mesh or suitable filling materials.
- Let 2 to 4 hours at least to apply a coat over dried coat.
It is not recommended to use over humid and wet floors, wait and assure the surface
is totally dry to apply.
Health and Safety:
Should be used gloves and goggles at the time
of Anqa MC-1 application. This product contains
Volatile solvents have low flash point, So, keep
away from fires and naked flames
COVERAGE
Apply ANQA-DAMP BS by spray, brush rubber squeegee in two coats, at least, and
approx. 250 micron per coat to give an approx. consumption of 1.5 -2 m2/kg per
coat.
PACKGING
Supplied in 20 kg pail or 200kg