DESCRIPTION:
Anqa-Putty is a ready-mix putty composed of vinyl polymers and a water-based formula. It is a non-toxic, non-flammable material used to smooth uneven cement and wooden surfaces, creating a flat and smooth finish that is easy to sand and ideal for paint application.

FEATURES:
- Ready to use; easily applied with a filling knife, spoon, or shovel
- Excellent adhesion on both interior and exterior concrete surfaces
- Suitable for application on wooden surfaces
- Free from harmful solvents; easy to clean tools after use
- Easy application on vertical and horizontal surfaces using a filling knife or spatula
- Flexible and resistant to cracking at low temperatures
- Excellent coverage properties

APPLICATION METHOD:
Mixing:
Mix the paste manually or mechanically to ensure homogeneity. Do not add water or any other substances.
Surface Preparation:
Clean the surface thoroughly to remove dust, debris, grease, and oils. It is recommended to moisten the surface with water before application. Ensure the ambient temperature is between 5°C and 40°C.
Application:
Apply the product using a knife or suitable tool.
- Apply the first coat and allow it to dry for 4–6 hours, depending on weather conditions.
- Apply one to three coats as needed.
- Sand the surface after each coat has fully dried.

STORAGE & SHELF LIFE:
Store in sealed containers under suitable conditions. Shelf life is 12 months. Use packages with the oldest production date first.

COVERAGE:
Approximately 1.8 m²/kg for two coats.

TECHNICAL SPECIFICATION:

Download Technical data Sheet ANQA Putty