Bituminous membranes, construction chemicals and waterproofing systems manufactured in the Kingdom and tested in our own labs before they reach your project.
Six reinforced bituminous membranes, fiberglass or polyester, from 120 g to 200 g, built for Saudi summer heat and structural movement without cracking or tearing.
Ten waterproofing systems matched to the surface: reflective roof coats, flexible cementitious coatings for potable-water tanks, seamless polyurethane, and impregnations that repel water yet let the wall breathe.
Primers, prime coats and bituminous paints applied cold, with no heating and no thinning, protecting foundations and basements and preparing the surface before membranes.
The certified IZONIL cement system: WDS additive, Universal, Extra and Skim Coat. Plaster and waterproof in one step, 100% watertight while trapped moisture escapes instead of staying in the wall.
Three grades of polymer-modified cementitious adhesives, C1TE, C2TE and C2TES1, for ceramic, porcelain and granite, plus coloured water-repellent grout that resists efflorescence.
Vertical repair mortar up to 20 mm without formwork, a smooth finishing coat that is paint-ready in an hour, and a non-shrink grout reaching 66 N/mm² under baseplates.
SBR latex in two grades, 20% and 40% solids, added to mortars and concrete to raise adhesion, flexibility and water resistance, and to bond new pours to old.
Self-levelling floors up to 5 mm with no cracks, solvent-free industrial epoxy that resists chemicals and abrasion, and a water-based putty that smooths walls before paint.
Corrugated polypropylene pipes, flexible HDPE conduits, self-extinguishing flush boxes in ten sizes and wall plugs in four thicknesses. A complete system for everything under the finish.
Press a production line or a product and its application areas light up in the building section — from the footings to the roof tank — or press a number in the drawing to see what fits that spot.
ANQA Factory, based in Saudi Arabia, specialises in producing and supplying plastic raw materials to waterproofing manufacturers across the Kingdom and the GCC.
We then expanded into our own brand of bituminous membranes, emulsions and primers — alongside a complete range of environmentally friendly construction chemicals.
From foundations to the final finish — products designed to work together, instead of mixing materials from different sources that do not.
Moisture trapped inside walls is behind most long-term building damage. The Izonil system blocks incoming water while letting the wall release its own moisture.
We grew from supplying raw materials into a complete Saudi brand, present in the Kingdom, the UAE and Kenya.
Holders of the “Saudi Made Gold” rating — the highest tier of the Made in Saudi programme — alongside international quality accreditations.
24 detailed technical guides covering step-by-step field installation for every production line, the international standards and what they mean in the Saudi climate, execution dimensions, acceptance tests and quantity take-off. Free, no registration.
A full method statement: substrate acceptance, overlaps, the bitumen bead, dimensioned details, fire safety and inspection hold-points.
A measured roof temperature of 91.5 °C and an annual swing of nearly 90 °C. These are the numbers every waterproofing specification in the Kingdom must be built on.
A table that starts from the problem as the customer describes it, not from a product name — for each case the first choice, the alternative and the governing technical condition.
Our technical team reviews the details and replies within one working day.
