DESCRIPTION
ANQA PROOF is a high-performance bituminous waterproofing coating for cold applications. It provides effective waterproofing protection against weather exposure, salts, diluted acids, and alkalis—without requiring heating before application.

FUNCTION:
ANQA PROOF is a high-quality waterproofing coating for
waterproofing concrete foundations underground, basements, inclined and vertical walls below and above the ground surface, and to prevent moisture on building facades before covering them with marble or stone. It is used as a saturated material for the old bituminous roof layer.

COVERAGE
For concrete surfaces at a rate of 600-700 gm/m²

APPLICATION:
- The surfaces to be waterproofed should be clean, dry and free from dust, dirt and oils.
- New concrete surfaces that are to be waterproofed should be allowed to dry completely before painting.
- ANQA PROOF can be applied using a brush, roller, or spray.
- ANQA PROOF does not need to be heated before use, just stir thoroughly to homogenize solution before use.

STANDARD:
ANQA PROOF complies with international standard BS-3690.

PACKAGING
200KG-100KG-18 Liters

STORAGE
Store in a dry and shaded area. Containers should be properly sealed after opening to prevent solvent evaporation.

HEALTH, SAFETY AND ENVIRONMENT
- Personnel must wear a protective mask, gloves, and goggles during application.
- ANQA PROOF contains volatile solvents with a low flash point.
- Adequate workplace ventilation is essential. Fire and naked flames must be kept at a safe distance.
- Read, understand and follow all Material Safety Data Sheets and product label information for this product prior to use.

TECHNICAL SPECIFICATION:

Download Technical Data Sheet Anqa-Proof